Limited Run ‘Beacon’
This is our limited edition white faced “Beacon” watch. The same great watch as before, just with an updated dial, updated pushers, and larger/easier to access crown. The polished PVD black and brown highlights make for an incredibly unique looking watch. We have very few in stock as this was an extremely limited run.
Out of stock
Movement: Miyota OS20.
- Japanese movement built by Citizen watch company.
- 3 positioned chronograph, which is a fancy term for “stopwatch”, but when used in flying or driving for that matter, helps you determine speed, distance, etc.
- 3 sub-dials. 60 sec, 60 min, and 24 hrs.
- Pull/Push crown used to set the time and date and to adjust chronograph settings.
Case: 44mm wide, 11.5mm thick 316 stainless steel, comes in PVD black as well.
- At 11.5mm this is incredibly thin, especially for a 44mm sized watch. This gives it a sleek, low profile on your wrist, unlike many of the 44mm+ sized watches that look big and bulky.
- The case back is screw on stainless steel, which increases the thickness a fraction more than the snap on backs, but provides a lot more protection and strength.
Hands: Luminescent markers on the minute and hour hands, as well as on all 3 sub-dials.:
Strap: Genuine oil tanned padded leather made in the USA.
- 22mm wide.
- 3 different colors (black, brown, and chestnut) with contrast stitching.
- Water resistant with a stainless steel buckle.
Sapphire Crystal Window: Used in most high-end watches, it provides a much higher scratch resistance than the more common mineral glass.
- Hardness of 9 on the Mohs scale.
- Only surpassed by diamond in terms of hardness.
Water Resistance: By no means is this a diving watch, but it is water resistant to 100 meters (Note. Not water proof), though not recommended to spend a prolonged amount of time in the water due to the leather strap.
Other internal components: Top and bottom rockers are 100% stainless steel, and they run through a stainless steel routing into the movement.
- A lot of cheaper watches will use a plastic router that breaks easily.
- The stainless steel adds an additional cost but increases the strength by an order of magnitude.
|Dimensions||9 x 2 x 6 in|